Top-loading machine with closed, stainless steel wash cabin
Machine made of stainless steel; operation of washing machine only possible if lid closed; opening only possible after completion of entire wash program.
Roll turning and bearing devices consist of two stainless steel axle shafts supported at the front side of the machine; powered by external gear motor.
No exact positioning in the machine required; lengths of wash items variable and no adjustments at the machine required.
Wash medium system for even spraying of contaminated wash item surfaces with alkaline medium.
Wash medium system consists of stainless steel wash medium container under wash chamber, circulation pump and a spray pump system.
Wash medium container equipped with instant water heater (temperature up to 60°C), fill-level control (operation level, max. level) and large, removable clarifying filter.
High-pressure system for directed spray wash of the wash item surfaces previously treated with the wash medium.
High-pressure system is equipped with high-pressure piston pump (pressure 100 bar) with connection
to customer‘s water network and horizontally oscillated carriage with high-pressure slot nozzle (travel adjustable).
Blower on horizontally moving carriage to remove any remaining water from wash item surfaces.
Control (PLC), including control elements and operating state lamps, located in timing case fitted to wash chamber. Automatic wash program includes: Spraying with wash medium – drip-off – high-pressure spray wash with longitudinal axis – blow-off with pressurized air; all operation processes take place while wash item is rotating.
Separate water cycle for high-pressure system; provision of warm water in a second, separate stainless steel high-pressure water container positioned under the wash chamber. Use of warm water for high-pressure spray wash; therefore further optimization of wash result und reduction in water consumption.
Water container for high-pressure pump including immersion heater (temperature up to 60°C), fill-level control (operation level, max. fill level) and large, removable clarifying filter.
High-pressure pump made of stainless steel
Clean water rinsing (only when connected to water cycle); includes separate rinsing pipe made of stainless steel, heat exchanger pipe and stainless steel piping.
Emptying of machine container by means of diaphragm pump.
Similar design to type HA, however, with the following differences:
Turning devices for rollers / cylinders consisting of two journals with two powered rollers, one journal moveable for different wash item lengths; sleeves can be loaded with end/journal plates.
Two high-pressure nozzles on carriage and double the capacity of the high-pressure pump, double carriage speed and therefore half the time /cylinder length for high-pressure cleaning.