Robust and user-friendly washing machine for inside cleaning of rectangular and cylindrical containers by brushes and simultaneous spraying with solvent.
Very good inside cleaning by means of a rotating spray head with pointed spray nozzles, spraying pressure 50 bars.
Depending on the shape of the container, the operator may choose between a spray head rotating around 2 axes and a spray head rotating around the vertical axis and moving up and down.
Separate spraying system for rinsing with clean solvent.
The spray head is lowered into the container, and the upper container opening closed by the machine lid, by means of a pneumatic lifting frame
Sensor for the lid pressure; spraying does not begin until the lid rests tightly on the container
Washing solvent in separate container, level switch for filling and draining
High-pressure reciprocating diaphragm pump as washing pump, separate pump for rinsing, pneumatic diaphragm pump for draining
Edge filter for protecting the high-pressure pump from foreign matter
3 manometric switches for deactivating the high-pressure pump in case of insufficient pressure (e.g. hose break), excessive pressure (contraction of the pressure line) or insufficient suction pressure (e.g. clogged edge filter)
Filter with removable basket for protecting the evacuation pump and the solvent tank
Automatic washing program: washing – draining – rinsing – internal air extraction; program steps can be selected individually
Explosion protection according to ATEX, category 1 (with type examination) for zone 0 inside, category 2 for zone 1 outside
Lid versions and adapters for different container openings
Outlet cleaning system, manual or automatic
Floor pan for the working area in front of the lifting frame / under the lid with the spray head
Internal air extraction system, optionally with warm air drying for nonvolatile solvents
External air extraction system, supplements/replaces the air extraction in the room/at the workplace
Solvent concentration measuring and regulating system for connection to an exhaust air cleaning system
like model SP50, but with the following differences:
Washing pressure 70 bars
Suitable for water-based/alkaline media
Heating of the washing agent, heat insulation of the washing agent container
Rinsing with water
Explosion protection that is adapted to the washing agent with the washed-off contamination and to the requirements of the installation site.